CANboardXL

Product Information:

• Data Sheet
• Manual

Contact:

• Phone numbers and e-mail addresses of all Vector locations
• Get price quote
• Request info material

Related Contents:

• Comparison CAN/LIN/J1708 Interfaces

  Technical Data	CANcardXLe	CANcardXL	CANboardXL	CANboardXL PCIe	CANboardXL pxi	VN8900	VN1600
  Number of channels CAN/LIN	up to 4 CAN or 2 LIN	2 CAN or 1 CAN/1 LIN or 2 LIN				up to 8 CAN or 4 LIN	up to 4 CAN or 4 LIN
  Time stamp accuracy	1 µs
  Operating system requirements	Windows XP/Vista (32 bit), Windows 7 (32 and 64 bit)
  Application area	mobile, stationary	mobile, stationary	stationary	stationary	stationary	mobile, stationary, standalone	mobile, stationary
  PC interface	ExpressCard 54 (PCI Express 1x)	PCMCIA Type II 16 bit	PCI 32 bit	PCI Express 1x	Compact PCI/PXI 32 bit	USB 2.0 or Ethernet	USB 2.0
  Transceiver	TWINcabs CAN-/LIN-/J1708cabs IOcab	CAN-/LIN-/J1708cabs IOcab	CAN-/LIN-/J1708piggies
  Temperature range Operation: storage:	0..+55°C -40..+85°C	-20..+65°C -40..+85°C	-20..+65°C -40..+85°C	0..+65°C -40..+85°C	-20..+75°C -40..+85°C	0..+55°C 0..+55°C	-40..+70°C -40..+85°C
  Dimensions (mm)	75 x 54 x 5	85 x 54 x 5	150 x 110 x 15	145 x 105 x 17	160 x 100 x 15	190 x 170 x 60	65 x 42 x 20 85 x 106 x 32 85 x 106 x 42
  Average response time1	100 µs	100 µs	100 µs	85 µs	100 µs	100 µs	300 µs
  Power consumption (typ.)	1 W	1 W	1 W	2,5 W	1 W	10 W	1610/11:1,3 W 1630/40: 2,5 W
  Decision Matrix	CANcardXLe	CANcardXL	CANboardXL	CANboardXL PCIe	CANboardXL pxi	VN8900	VN1600
  Notebook with PCMCIA	n.a.	++	n.a.	n.a.	n.a.	++	n.a.
  Notebook with ExpressCard	++	n.a.	n.a.	n.a.	n.a.	++	n.a.
  Desktop	+2/5	+2	+	++	+3	++	++
  Notebook with USB	n.a.	n.a.	n.a.	n.a.	n.a.	++	++
  Very short latency period	++	+	+	++	+	++	+
  High number of channels	++	+	+	++	+	++	+
  Realtime PC incl.	n.a.	n.a.	n.a.	n.a.	n.a.	++6	n.a.

  
  ¹ see Application Note AN-INI-1-001_Latency_Measurement, ² with PCMCIA-, Cardbus- or ExpressCard-Drive
  ³ Industrial computer, ⁵ see also Application Note "ExpressCard Hot-Plug", ⁶ Intel Atom CPU Board
  ++ highly recommended, + recommended
• Comparison FlexRay/CAN Interfaces

  Technical Data	FlexCard Cyclone II SE / E-Ray	VN3300	VN3600	VN7600
  Number of channels	2 FlexRay	2 FlexRay	2 FlexRay	2 FlexRay/3 CAN
  Usage	Analysis, stimulation, simulation	Analysis, stimulation, simulation
  Area of application	mobile, stationary	stationary	mobile, stationary	mobile, stationary
  PC interfaces	PCMCIA Type II 32 bit CardBus	PCI 32 bit, 33 MHz/66 MHz	USB 2.0	USB 2.0
  FlexRay communication controller (analysis)	Bosch E-Ray (Altera Cyclone II EP2C70)	Bosch E-Ray (Altera Cyclone II EP2C70)
  FlexRay communication controller (startup)	---	Fujitsu MB88121B
  Transceiver	Integrated (NXP TJA1080)	FRpiggy (NXP TJA1080)
  Memory for data transmission	8 kByte	2 MB
  Temperature range Operation: Storage:	0..+60 °C -40..+70 °C	0..+55 °C -40..+85 °C
  Dimensions (mm)	85 x 54 x 5,5	167 x 107 x 15	151 x 110 x 35	151 x 110 x 45
  Power consumption (typ.)	1.5 W	3.2 W	3 W	4.5 W
  Driver library	TZM FlexCard Library	Vector XL-Driver-Library
  Operating system requirements	Windows 2000, XP/Vista	Windows XP/Vista (32 bit), Windows 7 (32 and 64 bit)
  Functions	FlexCard Cyclone II SE / E-Ray	VN3300	VN3600	VN7600
  Dynamic reconfiguration of the CC buffers	---
  Transmission and reception of data and null frames
  Detection of invalid frames
  Cycle multiplexing
  Support of the maximum payload of 254 Byte
  In-cycle response
  Coldstart of the FlexRay cluster without additional node
  Hardware-based incrementing of a payload area	---
  Support of PDU	---
  Startup + asynchronous monitoring
  Time synchronization with synchronization cable without synchronization cable	---
  Trigger input and output
  Low PC loading due to DMA (Direct Memory Access)	---
  Very short latency period	---		---	---

• Bus Transceiver
• Accessories
• Drivers & Libraries
• Downloads